Tektronix DPO4000 Series, Руководство программиста

Страница: 54 / 623

Command Groups
Table 2-29: Power Commands (cont.)
Command Description
POWer:SWLoss:TOTal:POWER:MAX? Returns the maximum total power switching
loss calculation
POWer:SWLoss:TOTal:POWER:MEAN?
Returns the mean total power switching loss
calculation
POWer:SWLoss:TOTal:POWER:MIN?
Returns the minimum total power switching
loss calculation
POWer:SWLoss:VCEsat Sets or returns VCESAT value for use
in switching loss calculations when the
conduction calculation method is VCESAT
POWer:TYPe Sets or returns the power application
measurement type
POWer:VOLTAGESOurce Sets or returns the voltage source for the
power application
Save and Recall Command Group
Use the commands in the Save and Recall Command Group to store and retrieve
waveforms and settings. When you save a setup, you save all the settings of the
oscilloscope. When you recall a setup, the oscilloscope restores itself to the state
it was in when you originally saved the setting.
Table 2-30: Save and Recall Commands
Command Description
FACtory Resets the oscilloscope to factory default
settings
*RCL
Recalls saved oscilloscope settings
RECAll:SETUp Recalls saved oscilloscope settings
RECAll:WAVEform Recalls a stored waveform to a reference
location
*SAV Stores the state of the oscilloscope to a
speci
fi ed memory location
SAVe:ASSIgn:TYPe Sets or returns the assignment of the save
button
SAVe:EVENTtable:BUS<x> Saves event table data from bus<x> to a
speci
fi ed fi le
SAVe:IMAGe Saves a capture of the screen image to the
speci
fi ed fi le
2-40 MSO4000 and DPO4000 Series Programmer Manual