Tektronix DPO4000 Series Скачать руководство пользователя страница 350

Страница: 350 / 623

Commands Listed in Alphabetical Order

Arguments

IMAGe

assigns the Save button to save screen images.

WAVEform

assigns the Save button to save waveforms.

SETUp

assigns the Save button to save setups.

SAVe:EVENTtable:BUS<x> (No Query Form)

Saves the data from bus<x> to a speci

le and location; where x is the bus

number

Group

Save and Recall

Syntax

SAVe:EVENTtable:BUS<x> <file path>

Arguments

is a quoted string that de

nes the

le name and path location

where the event table will be stored.

NOTE.

lename> stands for a

lename of up to 125 characters, followed by a

period (".") and the three-character extension. Waveform

les should have a .csv

extension for comma-separated spreadsheet format

les.

SAVe:IMAGe (No Query Form)

Saves a capture of the screen image into the speci

le. Supported image

formats are PNG, Windows Bitmap, and TIFF. If an extension for a supported

type is added to the

le name, then the corresponding format will be used. If no

supported extension is added to the

le, the format to use will be determined by

the value obtained from the :SAVe:IMAGe:FILEFormat? query.

Group

Save and Recall

Syntax

SAVe:IMAGe <file path>

Related Commands

SAVe:ASSIgn:TYPe

Arguments

is a

lename, including path, where the image will be saved.

If you do not specify a directory, the oscilloscope will store the

le in the

current working directory. File name extensions are not required but are highly

2-336

MSO4000 and DPO4000 Series Programmer Manual

Содержание DPO4000 Series
















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DPO4000 Series

Отзывы:

Tektronix DPO4000 Series, Руководство программиста, Страница: 350 / 623

Результаты поиска

Содержание DPO4000 Series

Отзывы: