manualshive.com logo in svg

Tektronix DPO2304SX, Печатная инструкция, Страница: 494 / 920

Поделиться
Скачать
Tektronix DPO2304SX Скачать руководство пользователя страница 494

Behavior. The control window provides the following visual trigger controls.

■

Pressing the Visual Trigger button toggles visual triggering on and off.

NOTE. When Visual Trigger is turned on, the trigger mode is set to Normal. You can change the mode to Auto by pressing
the front panel Trigger button.

■

Double clicking in the expression area, displays the Qualification Expression Editor window.

■

Press the Save button to display the Save Visual Setup window. Save Visual Setup only saves the Visual Trigger settings.

■

Press the Recall button to display the file Open window.

■

The Trigger only if matches this condition graphic displays the triggering conditions required to display triggered
waveforms on the instrument.

■

Check the Display Visual Trigger on Screen check box to toggle display of the visual trigger areas on and off.

■

Check the Trig Expression check box to toggle display of the trigger expression on and off.

■

Check the Area Settings check box to toggle display of the visual trigger area settings on and off.

■

Click Default Colors to make the visual trigger areas use the default visual trigger colors.

■

Click Inherit Source Colors to make the visual trigger areas inherit the vertical channel colors.

■

Click the Visual Setup button to display the Visual Qualification Setup window.

What do you want to do next?

Learn about creating a visual trigger area.

Learn about controlling visual triggering.

Learn about saving a visual trigger setup.

Learn about recalling a visual trigger setup.

Learn about visual trigger qualification expressions.

Learn about defining a visual trigger area.

Learn about editing a visual trigger area.

Create a visual trigger area

In the graticule area, left click, drag the cursor, and then release.

Trigger setups

 

462

 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Содержание DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов