Tektronix DPO2304SX Скачать руководство пользователя страница 236 | Manualshive

Страница: 236 / 920

Tektronix DPO2304SX Скачать руководство пользователя страница 236

■

Press the Run button to start the error detector.

If desired, you may press Stop or Reset at anytime. After a Stop, you can press Run again.

Run starts the Error Detector testing for errors.

■

Select the Results tab to see the results of running the error detector.

NOTE. The Serial Error Detector automatically resyncs and resets all counts to zero if you press or disconnect and then
reconnect the signal.

If you are using one of the supplied AWG signal patterns, you can press the Force Event button on the AWG to induce an
error in the signal to verify the operation of the Error Detector. These AWG setup files are located in Win7 in the directory C:
\User\Public\Tektronix\Tekscope\ErrorDetector\AWG

Alternatively, you can verify operation by disconnecting and reconnecting the signal. There will be massive errors when the
signal is disconnected, but after the signal is reconnected the Error Detector will resynchronize to the signal, clear the error
counts and rates, and resume testing.

■

Press the Error Detector Off button to end the error detector session. A popup will appear saying the trigger has changed to
Edge.

What do you want to do next?

Set up the serial error detector.

Set error detector advanced settings.

Specify the error detector test pattern.

Set the error detector stop condition.

Set up the serial error detector

From the Analyze menu, select Serial Error Detector, press Setup, and then select the Source Setup tab. Error detector is not
available on DPO70000SX instruments.

Overview

If you select the Custom Setup or you select one of the presets, but want to make some changes to its settings, then you will
need to make selections in the Setup tab.

Error detector setups

204

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

«
...
234
235
236
237
238
...
»

Содержание DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов