Tektronix BPA105, Руководство пользователя

Страница: 58 / 96

Reference
2- 8
BPA105 Bluetooth Protocol Analyzer User Manual -- COMPANY CONFIDENTIAL
1/2001
To enter the bit operation for a custom error, click the Bit operation field to
activate a pull down menu from which you can choose Forced 1, Forced 0, or
Toggle as the bit operation. It is recommended that you use Toggle instead of
Forced 1 or Forced 0. (Refer to the first example in Figure 2--5 on page 2--6.)
In Figure 2--3 on page 2--4, the Error Packet Generator set up window was used
to create a sequence named Error Seq1 that contained an LMP_host_connec-
tion_req pattern. A Payload error with 3 bits toggled was set to be transmitted
with this pattern. The status was set to Single, which resulted in the error being
transmitted one time. Figure 2--8 shows the Bluetooth Protocol Analyzer display
resulting from transmitting the error.
In the Index column, 697 is highlighted (in blue in the application). This
indicates an error was transmitted. Following this error, Index 699 shows that the
LMP_host_connection_req pattern was transmitted again but without the error.
Figure 2- 8: Analyzer display of generated error
Custom Error
Example of Generated
Error