Clear and sanitize procedures
Media and data export devices
The following table lists the data export devices in the standard instrument and listed options. Detailed procedures to
disable these devices, if any, are shown following the table.
Table 3: Media and data export devices
Type and min.
size
Function
Method of
modi
fi
cation
Data Input method
Location
Process to disable
RS-232
Control peripheral devices
Directly
Rear panel (COM1)
The RS-232 port can be disabled. (See page 7,
the RS-232 port and USB functions
USB host
port (supports
removable USB
fl
ash drive)
User storage of reference
waveforms, screen images,
and instrument setups.
Control peripheral devices.
Directly
User writeable
Front and rear of instrument
Files can be deleted or overwritten on the BERTScope or
on a PC, or USB
fl
ash drive can be removed or destroyed.
The USB ports can be disabled. (See page 7,
LAN Ethernet
connector
C data
Directly
N.A.
Rear panel
The Ethernet port can be disabled. (See page 9,
GPIB connector
C data
Directly
N.A.
Rear panel
The GPIB port can be disabled. (See page 9,
Disable the RS-232 port
and USB functions
Complete the following steps to disable the RS-232 ports and USB functions:
1.
Press
Delete
on the keyboard during Boot Up to go to the BIOS con
fi
guration menu.
2.
Press the down arrow key and go to
Integrated Peripherals
.
3.
Press
Enter
.
4.
Press the down arrow key and go to
Super IO Device
.
5.
Press
Enter
.
6.
Go to
Onboard Serial Port 1
.
7.
Press
Enter
.
8.
Press the up arrow and set Serial Port to
Disable
.
Tektronix BERTScope BSA Series Declassi
fi
cation and Security Instructions
7
