Tek-Wave 4300B
Technology Solutions
• The Tek-Wave 4300B should not be mounted closer than 8” (200mm) to the vessel wall.
• The Tek-Wave 4300B is not mounted in the center because interference can cause signal loss.
• The Tek-Wave 4300B is not mounted above the fill stream.
• A weather protection cover is recommended to protect the instrument from sun or rain.
• The radar antenna should be vertical to measure the media surface.
Table 1: Wire Description
Fig 6: Wiring Connections
Fig 7: General Mounting Position
4. Power Supply
+
_
Wire Color
Function
Brown
V
White
Voltage – (4-20mA)
Green
Modbus RS485 A
Yellow
Modbus RS485 B
Gray
Ground
5. Installation
• General mounting conditions
8”(200mm)
