TEKTRO WHALESTEP-THRU, Руководство пользователя

Страница: 22 / 48

Safety Check
Basic Steps
Brakes
o Test front and rear brakes for proper function.
o Ensure brake pads are not overworn and are correctly positioned in relation to rims.
o Make sure brake control cables are lubricated, correctly adjusted and display no obvious wear.
o Check that brake control levers are lubricated and tightly secured to handlebars.
Wheels and Tires
o Inflate tires to within recommended limits displayed on sidewalls.
o Check for bulges or signs of excessive wear.
o Clean tires to ensure tread is exposed
o Ensure rims run true and have no obvious wobbles or kinks.
o Check that all wheel spokes are tight and not broken.
Steering
o Ensure handlebar grips are properly installed, and handlebars and stem are correctly adjusted and tightened to allow proper steering.
o Check that handlebar is set correctly in relation to forks and direction of travel.
Chain
o Check that chain is oiled, clean and runs smoothly.
o Use extra care in wet or dusty conditions.
Cranks and Pedals
o Securely tighten pedals to cranks.
o Ensure cranks are securely tightened and are not bent.
Derailleurs
o Check that derailleur(s) are adjusted and functioning properly.
o Ensure shift and brake levers are attached to handlebar securely.
o Check all brake and shift cables for proper lubrication.
Motor Drive Assembly
and Throttle
o Ensure hub motor is spinning smoothly and motor bearings are in good working order.
o Check that all power cables running to hub motor are secured and undamaged.
o Make sure hub motor axle bolts are secured and all torque arms and torque washers are in place.
Battery Pack
o Ensure battery is charged before use.
o Check for any visible damage to battery pack.
o Lock battery securely to frame.
Safety Checklist
21