1. Use included mounting template to mark hole locations.
Use a level to position template. Tape securely in position
before marking. Remove template when finished.
3. Pre-install lower pair of hardware and tighten down leaving
just enough space to snugly fit base.
4. Hang hose reel by sliding slotted base onto pre-installed
hardware. Carefully let go of hose reel, making sure its
weight is being supported. Hose reel should support itself
in this position long enough to install remaining hardware.
5. Immediately install second set of hardware. Tighten all
hardware until snug. Do not overtighten.
CAUTION: CEILING MOUNTING REQUIRES TWO PEOPLE. DO NOT
ATTEMPT TO MOUNT HOSE REEL TO CEILING BY YOURSELF. USING
A LADDER CAN BE DANGEROUS AND IS NOT RECOMMENDED.
1. Use included mounting template to mark hole locations. Tape securely in position
before marking. Remove template when finished.
2. Drill holes for bolts. Keep drill steady and in line with hole to prevent wobbling and
enlarging of hole.
3. Pre-install one pair of hardware and tighten leaving just enough space to fit base.
4. Hang hose reel by sliding slotted base onto pre-installed hardware. DO NOT LET
GO OF HOSE REEL!
5. While continuing to support reel, install second pair of hardware. Tighten all
hardware until snug. Do not overtighten.
1. Use included mounting template to mark hole locations. Tape securely in
position before marking. Remove template when finished.
2. Drill holes for bolts. Keep drill steady and in line with hole to prevent
wobbling and enlarging of hole.
3. Set reel in position, aligning base with holes. Install all hardware,
tightening until snug. Do not overtighten.
CEILING
WALL
FLOOR
MOUNTING TEMPLA
TE
2. Drill holes for bolts. Keep drill steady and in line with hole to
prevent wobbling and enlarging of hole.
WOOD - Lag bolt,
lock washer, and
washer
4X
4X
4X
METAL - Bolt, two
washers, lock washer,
and nut
MASONRY - Bolt, lock
washer, washer, and
anchor
page 5
ATTENTION - Mounting bolts
can loosen with heavy use or over
time. Check condition of mounting
bolts every 6 months.
