background image

OPERATOR’S MANUAL

WARNING: BEFORE USE, READ AND UNDERSTAND OPERATOR'S MANUAL. Wear impact-resistant 

protective eyewear in work area at all times. This reel must only be mounted to a load bearing structural object 

such as a stud, rafter, or floor which can support the combined weight of reel and hose and can withstand pulling 

forces on hose when in use. Air hose is designed for use on regulated air compressor systems. DO NOT 

EXCEED MAXIMUM WORKING PRESSURE. Be sure to restrain hose as it rewinds—do not allow hose to 

rewind at full speed. Never exceed air pressure rating for any air tool. Read and follow all air tool owner’s manuals 

and instructions. Certain air tools, such as paint spray guns, sanders, grinders, and sandblasting equipment, 

present specific dangers and hazards. Consult applicable material safety data sheet for precautions and possible 

respirator recommendation. 
CALIFORNIA WARNING: This product contains chemicals known to the State of California to cause birth defects 

or other reproductive harm. Please wash hands thoroughly after handling.

STORE THIS MANUAL IN A SAFE 

PLACE FOR FUTURE REFERENCE

®

Model #s

46845, 46848 

Save time, contact us first.

888-648-8665

[email protected]

NEED HELP?

!?

AUTO REWIND AIR HOSE REEL

Содержание 46845













Отзывы: