background image

9. Use your turn signals, checking for traffic well in advance of turning

If the spray vehicle is not 

equipped with turn signals and law requires them, install them prior to operating on or near 

public roads. 

 

 

Safety Decals 

 

1. Keep decals clean. Remove dirt with a wet clean cloth when necessary. 

2. Replace safety decals if destroyed, missing, painted over or unreadable. If any safety decals 

are covered or  obscured when the ROPS  is mounted,  it is recommended that you purchase 

replacement decals from the spray vehicle manufacturer. Mount them in a readable location at, 

or near, their original location before operating the spray vehicle. 

3. New ROPS decals and spray vehicle decals are available from your spray vehicle dealer. 

 

 

ROPS Safety 

 

1. Install the ROPS in accordance with Tektite mounting instructions. Failure to do so may affect 

the ROPS ability to withstand a roll over.  

2. If the ROPS is subjected to alteration, structural damage or involved in an over turn accident, 

the entire structure must be replaced. Failure to do so may result in injury or death in the event 

of a roll over. 

3. If the spray vehicle in not equipped with seat belts, purchase approved seat belts from the 

spray vehicle manufacturer or Tektite prior to operating the spray vehicle. 

4. Always fasten seat belts prior to operating the spray vehicle. 

5. Always operate the spray vehicle from the operator’s seat. 

6. Remove mud, crop residue, chains and tools from steps and operator’s platform. They may 

interfere with pedal operation or entry/exit from the spray vehicle. 

7. Remove all loose chains, tools, and equipment from the operator’s platform. Failure to do so 

may cause injury or death in the event of a roll over. 

8. Do not install the ROPS on a spray  vehicle  model that the ROPS  is not designated for 

(compatible spray vehicle designations are printed on the ROPS serial number plate).  The ROPS 

is designed specifically for individual models to ensure ROPS requirements will be met. 

Installing the ROPS on a non designated spray vehicle may result in injury or death. 

 

 

Emergency Exits 

 

This ROPS has 2 exits, which may be used in an emergency: left and right side doors. 

 

 

 

    June 2021© Toro MP5700 ROPS Cab Operation Manual 

Содержание Toro MP5700












Отзывы: