background image

Safety Precautions 

 

Safety First 

 
Read  these  instructions  carefully.  It  is  essential  that  you  read  the  instructions  and  safety 
regulations before you attempt to assemble or use the features that are on this cab/ROPS. 

 
Danger: 

Indicates an immediate hazardous situation which, if not avoided, will result in death 

or serious injury. 

 
Warning: 

Indicates a potentially hazardous situation which, if not avoided, may result in death 

or serious injury. 

 
Caution: 

Indicates a potentially hazardous situation which, if not avoided, may result in minor 

or moderate injury. 

 
Important: 

Indicates  that  cab  or  property  damage  may  result  if  instructions  are  not  carefully 

followed. 

 
NOTE: 

All  products  are  designed  to  give  safe,  dependable  service  if  they  are  operated  and 

maintained  according  to  instructions.  It  is  the  owner’s  responsibility  to  be  certain  anyone

 

operating this product reads this manual, and all other applicable manuals, to become familiar 
with this cab and all safety precautions. Failure to do so could result in serious personal injury 
or  cab  damage.  If  you  have  any  questions,  consult  your  dealer.  Read  and  understand  this 
manual before operation. 

 
NOTE: 

A  safe  operator  is  the  best  assurance  against  accidents.  All  operators,  no  matter  how 

experienced  they  may  be,  should  read  this  operator  manual  and  all  other  related  manuals 
before  attempting  to  operate  features  in  this  cab/ROPS  and  operate  the  base  tractor.  Please 
read  the  following  section  and  pay  particular  attention  to  all  safety  recommendations 
contained in this manual and those labelled on the cab and on the tractor. 
 
 

 

    April 2021© Toro Groundsmaster 4000-D ROPS Operator Manual

Содержание Toro Groundsmaster 4000-D












Отзывы: