. Take the right rear bracket and put into the pocket where the 2-post ROPS was mounted. The
cab mount plate should be facing forward when installed. Re-use the factory fasteners.
. Return to the cab to install lift brackets next. To remove the gas shock on the left cab door,
slide a flat screwdriver underneath the small clip on the end cap that must be pulled UP order
to pop the shock off the ball stud.
The shock will release very easily when this is accomplished.
Lift the door assembly straight up and off the cab and put aside for now. Remove right door as
well. Un-bolt and remove both under-hood shields from cabs.
June 2021© Massey GC1725M ROPS Cab Installation Manual
