TEKTELIC Communications Kona T0004895, Техническое справочное руководство

Страница: 15 / 35

Kona LoRa IoT Home Sensor TRM T0005370_TRM Version 1.2
TEKTELIC Communications Inc. Confidential Page 15 of 35
3.4 Sensor Application Configuration
3.4.1 Periodic Tx Configuration
All periodic transducer reporting is synchronized around ticks . A tick is simply a user
configurable time-base that is used to schedule transducer measurements. For each transducer,
the number of elapsed
ticks before transmitting can be defined.
Note: Certain transducer types, such as accelerometer and light, need to be enabled for
periodic reporting. Details are available in each transducer’s respective section. Table 3-6 shows
a list of registers used to configure the Sensor’s periodic transmissions.
Table 3-6: Periodic Transmission Configuration Registers
Address Access Value # Bytes Description
0x20 R/W Seconds per tick 4 Sets the tick for periodic events. A value of
0 disables all periodic transmissions.
0x21 R/W Ticks per Battery Tx 2 Ticks between Battery reports. A value of 0
disables periodic battery reports.
0x22 R/W Ticks per
Temperature Tx
2 Ticks between Temp reports. A value of 0
disables periodic Temp reports.
0x23 R/W Ticks per RH Tx 2 Ticks between Humidity reports. A value of
0 disables periodic Humidity reports.
0x24 R/W Ticks per Reed Switch
Tx
2 Ticks between Reed Switch reports. A value
of 0 disables periodic Reed Switch reports.
0x25 R/W Ticks per Light Tx 2 Ticks between Light reports. A value of 0
disables periodic Light reports.
0x26 R/W Ticks per
Accelerometer Tx
2 Ticks between Accelerometer reports. A
value of 0 disables periodic Accelerometer
reports.
0x27 R/W Ticks per MCU Temp
Tx
2 Ticks between MCU Temp reports. A value
of 0 disables periodic MCU Temp reports.
0x28 R/W Ticks per PIR Tx /
Ticks per Moisture Tx
2 Ticks between PIR reports. A value of 0
disables periodic PIR reports.
0x29 R/W Ticks per External
Input Tx
2 Ticks between External Input reports. A
value of 0 disables periodic External Input
reports.