12
4. Arming
Press
“
Arming key
”
directly on the remote control.
If successful set, a
“
tick
”
sound can be heard from the camera and the indicator
light of the camera will turn on continuously with green color
5.Disarming
Press
“
Disarming key
”
directly on the remote control.
If successful set, a
“
tick
”
sound can be heard from the camera and the indicator
light of the camera will flash in green color.
6. Incoming video call
Master and normal users who dial the camera with 3G mobile phone can watch
the monitoring area after two ringing sound.
Unauthorized access can not get through when dialing.
7
．
Press the emergency key to trigger an alarm :
Press the emergency key on the remote control, the camera will firstly send SMS
to master to inform SOS and then dial the phones of master or users members
one by one. However, if the 3G network not available, the camera will dial the
voice call until getting through.
Chapter 7. Advanced Operation
1.Activate remote camera
(Authority: Master)
When first time using or after resetting the remote camera, it needs to set the
master number to activate the camera so that it can automatic send alarm
message to the master.
Master should dial a voice call to the camera,the camera will default master
mobile No as a authorized No.
After success activating the camera, it will reply you:
“
Welcome to use remote
camera, the password is 1234
”
.at this time,you mobile No already set as
authorized No.
If the camera has been activated before, the old master number will be saved in
it ,when you dial again,the camera will not get through,or you can send
