TEK-IRIGB-MNL-v2-042016
P a g e
| 11
www.tekron.com
© 2016 by Tekron International Limited. All Rights Reserved. All trademarks are the property of their respective holders. The
information in this document is provided for informational use only and is subject to change. For further information or support, go to
www.tekron.com.
Signal Details Screen
1.
The IRIG-B analyzer will detect if an IRIG-B signal is present and display the screen in
Figure 16 1 second.
Figure 16: Signal detected
2.
The IRIG-B Analyzer will then display the signal properties as shown in Figure 17, the arrow
keys can be used to navigate through the listed details.
Figure 17: Fiber IRIG-G Signal details
Notes:
-
A full description of the signal properties displayed on the details screen can be seen in
Appendix.Figure 18Figure 18: Transferring Data
3.
When viewing the Details screen you can press F2 to
re-
test the IRIG-B signal.
Warning
: Important note!! Always replace the rubber protective plug after use to prevent the
optical receiver from being subjected to dust and other contaminants which could inhibit the
IRIG-B Analyzer from operating correctly in future.
