17
Remark:
I.
It is possible to set voltage values once the outputs are valid. However, for protection of the
load, it is recommended to stop output before voltage setting.
II.
Due to the total power limit, current settings might be decreased automatically once
voltage setting increasing.
3.4 Current Setting
The current setting range is from 0.000A to 1.66A, follow the setting steps as below:
1.
Switch on the power supply
2.
Push the
OUT
button to stop the output setting and light off
OUT
button
3.
Push and light the
SET/ENTER
button, the max. value position is flickering of voltage setting area.
4.
Push the
V/A
button, the max. value position of current setting is flickering and current setting is
activated
5.
Push the
LEFT
or
RIGHT
arrow keys to move the cursors
6.
Push the
UP
or
DOWN
arrow keys to change the settings
7.
Push
SET/ENTER
button and light off this button to exit current setting mode
Содержание TP3016M Series
Страница 1: ...1 User Guide TP3016M Series Switching Mode DC Power Supply...
Страница 8: ...8 1 2 3 4 5 6...
