02
step
CONNECT AND CONFIGURE DUOS uTEMP WIRELESS TRANSMITTER
DUOS UTEMP WIRELESS TRANSMITTER
INSTALLATION GUIDE
15
The status string at the bottom of the software window gives feedback on reading operations.
In configuration mode,
DUOS uTemp
Wireless Transmitter
activates 4 LEDS: 2 blue LEDs flashes, red and green
LEDs remains active and steady.
LED flashes quickly
LED stays on and fixed
NOTE:
After reinserting the cable, you have 10 seconds to enter configuration mode by clicking on Connect ( )
button, while blue LEDs flashes slowly.
When the 10 seconds window have been exceeded, blue LEDs are steady and it is no longer possible to enter
configuration mode.
In that case, the cable must be removed from the transmitter and reinserted - step 3.
07
Click on
Connect
( ) button to enter configuration mode. These configurations are read automatically.
