ver.
UOP-Yv2_6_en
6
3
Connect antenna to
RF
GND
terminals
RF GND
Antenna
4
Electrical installation to the output terminals of the RTD
should be carried out in accordance with the selected con-
nection diagram (Section 8)
5
Place the cover
11 Maintenance
11.1
Maintenance of the RTD is carried out according to a
scheduled preventive system at least once a year.
11.2
Maintenance work includes:
a) checking the exterior of the RTD, the reliability of the RTD
mount, the condition of the external installation wires, contact
connections;
b) cleaning the RTD case;
c) checking the performance of the RTD.
12 Compliance with standards
12.1
Ingress Protection Code IP41.
12.2
Operation frequencies 433,92 MHz + 0,2 % do not have
prohibitions on use in all EU countries.
13 Warranty
13.1
The quality management system is certified for compli-
ance with
ISO 9001
13.2
Warranty period of operation -
5 years
from the date of
commissioning, but not more than
5 years 6 months
from the
date of manufacture.
13.3
The average service life of the RTD is 8 years.
13.4
The manufacturer is obliged to repair or replace the RTD
during the warranty period.
Warranty doesn
’t come into effect in the following cases:
- non-observance of this operating manual;
- mechanical damage to the RTD;
- repair of the RTD by another person other than the Manufac-
turer.
The warranty applies only to the RTD. All equipment from oth-
er manufacturers used in conjunction with the RTD, including
batteries, is subject to their own warranties.
The manufacturer is not liable for any damage to health,
property or other accidental or intentional loss, direct or
consequential damage based on the user's statement that
the RTD did not perform its functions, or as a result of
misuse, failure or temporary inoperability of the RTD.
TEKO-TD LLC
420138,
Prospekt Pobedy 19,
Kazan, Russia
+7 (843) 528 03 69
Made in Russia
