5 ASSIGNING TO THE SYSTEM
1)
Turn detector counterclockwise.
2)
Start assigning on the Security Hub mobile
or desktop app. Assigning starts for 45-60
sec.
3)
Insert battery into the detector:
Secondary
– first
Primary
- next
4)
Detector’s led start flashing: 5x white flash
in 1 sec.
Make sure that the assigning is successful on
the Security Hub mobile or desktop app. If as-
signing is unsuccessful, repeat the procedure.
6 RESET PROCEDURE
1)
Turn detector counterclockwise.
2)
Close the DEL contacts - the red indicator
will turn on.
3)
After turning off the red indicator, open the
DEL contacts.
4)
The detector generates a notice “No con-
nection” and becomes available for as-
signing to the system.
7 INSTALLATION PLACE
1)
Installation height should not exceed 10m; the
minimum distance to the wall - 0.1 m must be
observed.
2)
Do not install the detector:
-
in front of the air conditioner;
-
in front of the window (dust can cause a
false alarm of the detector).
3)
Do not mask the detector; smoke particles must
freely enter the smoke chamber.
ATTENTION!
Remove the protective cover
immediately before commissioning the detector.
8 INSTALLATION PROCEDURE
1)
Remove the elec-
tronic unit from the
base
2)
Mount the base on
ceiling
3)
Insert battery.
Secondary
– first
Primary
- next
4)
Install the electronic unit.
5)
Perform detector test (see section 9).
9 TESTING
Test examines the electronic circuit of the
detector and the smoke chamber,
except for
the possibility of penetration of smoke into
the chamber.
The test is performed by the laser tester "Astra-
942" (not included).
1)
To activate the
«Test»
mode:
- press the
red button
of the laser tester;
-
direct laser beam to the detector’s LED;
- irradiate the LED for
1 sec
.
LED should turn on in red for 2 sec.
detector’s LED:
-
normal work: 1x red flash in every 2 sec.
during 30 sec.
-
if there is a defect or malfunction: 3x red flash
in 25 sec. period.
Security Hub
mobile app
: fire alarm notifi-
cation.
10 WARRANTY
The operation warranty period is 5 years from
the date of manufacturing, which is indicated on
housing and box of detector.
Mount holes
