• Never place a candle or other source of ignition in the unit as it may fall and open fire.
• If the mains cord or power connector is damaged or broken, or if there is a sudden loss
during operation, or if you notice a strange smell or smoke, turn off the device immediately,
unplug the power cord and contact the manufacturer's technical support department.
Installation / Storage
• This unit contains high precision electronics. To ensure the best performance and prevent
damage, remove dirt, dust, etc. Do not store it anywhere as it may collect. Do not expose to
extreme heat or cold (eg in direct sunlight, near a heater or in a vehicle at noon). Place the
unit in a safe place to prevent it from falling.
• Disconnect all cables before moving the unit.
• When installing the unit, make sure an outlet is easily accessible. In case of malfunction,
turn off the unit and unplug the power cord. Make sure the power cord is disconnected
when the unit is not used for a long period of time.
Connection
• Always turn off and unplug all devices before connecting the unit to other electronic
devices.
Care
• Do not spill liquid on the unit. Do not use any diluents or volatile liquids to clean the unit.
Instead, use a soft, slightly damp cloth and allow the unit to dry completely before using it
again.
Use
• Do not insert your finger into the openings in your unit.
• Never put paper, metal pieces or other objects into the openings of your unit. If there are
foreign parts in your unit, turn off the device and unplug the power cord. Contact the
manufacturer's technical support department.
• Do not place or place heavy objects on the unit. Handle all buttons, connectors and
switches gently to avoid possible hardware damage.
2. INTRODUCTION
