Tekno RC EB48SL SuperLight, Инструкция по сборке

Страница: 19 / 28

TKR6030
TKR6140
TKR1528
TKR6007
TKR5527
Note: slot in spring
perch should face
outside of vehicle.
TKR1202
TKR1605
TKR6008
TKR6008
TKR6009
TKR6016
M2.5 Lock Nut Zinc
TKR1200
x2
TKR1528
M3x18mm Cap Head Screw
x2
TKR1211
M3 Lock Nut Flange Black
x2
*TKR6041
*TKR6042
*TKR6043
*TKR6031
*TKR6032
*TKR6033
*TKR6034
*TKR6055
*TKR6056
(Option)
TKR1200
TKR6008
TKR6017
TKR5049A
TKR1341
*TKR6017T
(Option)
*TKR6050
*TKR6051
*TKR6052
*TKR6053
*TKR6054
*TKR6063
*TKR6064
*TKR6065
(Option)
Note:
shaft guide
orientation
Note: rear shocks use
longer shock bodies - TKR6016,
longer shock shafts - TKR6017,
longer springs - TKR6030
and longer shock boots - TKR6144
Note: Use green
slime or oil on
shock shaft
threads AND
O-rings to
prevent tearing
and leaking.
TKR6018
TKR6009
Drill 1-2mm
hole here
for emulsion
Drill 1-2mm
hole here
for bleeder
*TKR6013
(Option)
TKR6018
*TKR6003
(Option)
*TKR6015
(Option)
TKR5125
Step
N-1
Step
N-2
Step
N-3
Vented build requires a
1-2mm hole drilled in
addition to the bleeder hole
*Do not drill
bleeder
hole for this
build
**Bladder not
used in this
build
*NOTE: Vented is the prefered stock build
TKR6140
TKR6143
Note: Shock boots
must be installed
before attaching
rod end.
TKR1202
M4 Lock Nut Black
x2
TKR1211
Note: Tighten
TKR1211 lock
nut all the way
down, then back
off 1/4 turn.
Use thread lock!
Thread
Lock
Bag N
Rear Shock Assembly
19
Stock shock position is outside
hole on the arm and
ouside hole on the tower
Stock rear ride height is 28mm
Shock length (droop) is 117mm
TKR1341
M4x6mm Flat Head Screw
X2
Vented
Build
Standard
Build
Emulsion
Build
#200wt
shock oil
Shock Building Options
TKR1605
M3x10mm Set Screw
x2