TEKNIX TEK09245W, Инструкция по установке и эксплуатации, Страница: 13 / 25

13
3.1.4. Adjusting The Rinse Aid Dispenser
3.1.5. Adjusting the Water Softener
The water softener in your appliance has been pre-set to the mid-
setting, but if you need to change the setting please proceed as
follows: Unscrew the salt container lid. Turn the arrow to the ‘+’ or ‘-‘
setting according to your water hardness (see chart below). Now
screw the salt container lid back into place.
Please note that the Clarke scale indicates the UK degree of water hardness
Please Note: Occasionally small rust deposits may be present in your
incoming water supply due to the water passing through older pipe work in
the network. If present, the rust may show up as small harmless brown
spots on the stainless steel interior of your appliance. To remove the
spots, simply wipe them away with a damp cloth.
The rinse aid container has 6 settings.
Your machine has been pre-set at setting 4.
If you can see white spots on the crockery or poor
drying is a problem increase the setting to 5.
If the crockery is still not drying properly, increase
the setting to 6.