1 0
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
III. Preparations for use
Installation location:
1.
Ventilation condition
When installing your
freezer
ensure it is in a well ventilated location. Do not install
the
freezer
near any heat source such as a cooker. Avoid locating the
freezer
in
direct
sunlight,
this will ensure you reduce the energy consumption of the appliance. Do
not
locate the
freezer
in a damp place, this will prevent the
freezer
from rusting
and leaking
electricity.
The result of the total space of the room in which the
freezer
is installed being
divided
by the
freezer
charge amount of the
freezer
shall not be less than 8 g/ M3.
Note:
The
amount of refrigerant charged for the
freezer
can be found on the
nameplate.
2.
Heat dissipation space
When your
freezer
is installed and running, it will give off heat to it’s surroundings.
Therefore, a minimum of 300mm free space should be at the top of the unit, minimum of
100mm on both sides, and a minimum of 50mm at the back of the refrigerator.
Dimensions in mm:
W
D
H
A
B
C(°)
E
F
1428
566
10
11
1
107
1
25
50
100
Note: Figure 1, Figure 2 only illustrate the space demand of the product.
545
