TEKNIX SMF1440B, Инструкция по эксплуатации, Страница: 16 / 26

Defrosting
After a period of use, a thin layer of frost will be formed on the freezer compartment inner wall
(or evaporator) surface, which may affect the refrigeration performance if exceeding 5mm in
thickness. In such case, you need to gently scrape the frost off using an ice scraper rather than
the metal or sharp object. Frost needs to be cleared off every 3 months, or if the frost is affecting
the normal use of the drawers and or the refrigeration performance. Follow the following steps
to remove frost:
1.
Take out the frozen foods , shut off the mains power supply , open the refrigerator door , and
gently remove the frost from the inner wall with an ice scraper. To speed up the thawing
process , it is suggested to place a bowl of hot water inside the refrigerator/freezer , and
when the solid ice particles become loose , use an ice scraper to remove from surface.
2. After defrosting , clean the fridge/freezer inside , and switch on the power supply.
Changing t he internal lamp
Before carrying out the bulb replacement always press and turn the thermostat control to
dial to position “OFF”, then disconnecting the mains supply.
• Hold and lift up the light bulb cover.
• Remove the old bulb by unscrewing it in an anti-clockwise direction.
• Replace with a new bulb (10W) by screwing it in a clockwise direction marking sure
that it is secure in the bulb holder.
• Refit the light cover and re-connect your Fridge/Freezer to the mains supply and
switch on.
1 7
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual