TEKNIX FF1860B, Руководство пользователя

Страница: 7 / 14

fridge temperature gets decreased while the freezer temperature increased.
Ø
When the temperature mode keeps unchanged, adjust the air regulating rod from right to left, the
fridge temperature gets increased while the freezer temperature decreased.
Ø
It is recommended to adjust the air regulating rod in the middle position. When the user needs a
lower freezer temperature, adjust the air regulating rod to the left properly, then the freezer
temperature decreases while the fridge temperature rises. When the temperature meets the
requirement, adjust the air regulating rod back to the middle position again in a timely manner.
The fridge thermostat and the air regulating rod should be used in combination.
Ø
When the ambient temperature around the refrigerator is higher than 35
℃
, do not set the
thermostat at Mode 1 and adjust the air regulating rod to the leftmost position, so as not to affect the
normal refrigeration of the refrigerator.
Ø
Do not set the thermostat at Mode 1 and adjust the air regulating rod to the rightmost position, in
order to avoid the fridge compartment undercooling.
Ø
If the fridge temperature is not cool or undercooled, set the thermostat at the middle mode and
adjust the air regulating rod in the middle position.
Ø
In case the
‘
Fastcool
’
function is enabled, adjust the air regulating rod to the middle position.
1.2 Fast Cool
Cooling down the temperature in a rapid manner is beneficial to the prevention of food nutrition against lost and the
preservation of freshness.
After a cumulative running period of17 hours, the fast cooling function will exit automatically.
1.3 Power cut memory
In case of power failure, the refrigerator will maintain the operating state before power failure when power supply is
restored.
1.4 Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less
than 5 minutes), the compressor will not be started immediately after it is powered on.
1.5 Fault alarm
When the indicator light of Fast Cool or Mode 4 keeps flashing, it indicates fault with the refrigerator. Please contact the
aftersales person for visiting service in such case.
Temperature adjustment
Use
environment
Recommended mode setting
on the display panel Recommended air regulating
rod position
Notes
Higher
than 35
℃
1) It is recommended to
set at the middle mode.
2) The temperature
modes can be adjusted
as recommended in the
left table in case of
change to the ambient
temperature around the
refrigerator
16 ℃ -35 ℃
Lower than
16
℃