The Transmitter:
Insert two AAA batteries into the battery compartment ensuring that the +and – polarity is
correct. the transmitter wil fail to function l
Insert the audio plug of the transmitter into AUDIO-OUT socket of audio source (such as TV
set, audio device, PC, DVD player, VCD player, CD player, MP3 player…etc.). In case the audio
out socket of the audio source is the earphone socket.
Using Your Product
The Y adaptor cable can be used for connection (see Fig.1).To achieve best reception spread
out transmitter audio cable which can be also used as Antenna.
Listening to the radio
The receiver can be used separately as an FM radio. Press SCAN key once and the receiver will
automatically search toward a higher range and lock one radio channel: when the highest range
is reached press RESET key and the frequency returns to the lowest range.
Press SCAN key again and the receiver will search the radio channels from the low range again.
Wired earphone
Insert one end of the audio cable (optional)into the audio socket of the receiver(see Fig.4). and
insert the other end into the earphone socket of the electrical devices such as MP3 player.VCD
player.DVD player…etc and then the unit can be used as a wired earphone.
Turning off the unit
When the unit is not used, move the function switch on the emitter to OFF position to turn off
the emitter. And turn the volume control receiver to the OFF position. and the power indicator
receiver will go out. And the receiver will turn off. Remove batteries when not using unit for a
long time.
Notes
To achieve best reception spread out transmitter audio cable of the (the transmitter audio cable
as these can also be used as antenna).
If the sound is distorted or too strong, adjust the volume of the signal source (TV set, VCD
player, DVD player, PC… etc) to a lower level and the reception and performance may
be improved .
Replace the batteries
if you are having the following problems,
1. The emitter indicator becomes dim.
2. The receiver reception is poor.
3. The volume becomes weak and the sound is distorted.
4. when the sound quality or reception is not clear or when the unit will not turn on
(usually after approximately 30 hours of operation)
5 Do not mix old & new batteries; Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries;
6. Please insert or replace batteries with the correct polarity
