Teknion transit страница 4 Скачать руководство пользователя

Страница: 4 / 4

STEP 5: Align the whole on the Modesty Panel with the holes on the Flush End Bracket.
Secure the Modesty Panel with Screws provided.

STEP 6: Align the holes on the Wire Tray with the holes on the Modesty Panel. Secure it with
Screws provided.

NOTE: FS Wire Tray Modesty Panel is adjusted to position the vinyl trim flush to the
underside of the Worksurface.

STEP 7: Using a leveler, adjust the Gable Leveler to level the assembled Worksurface.

Section:
Description:

Page No:

Date:

INSTALL MODESTY PANEL

INSTALL WIRE TRAY

LEVEL THE ASSEMBLED WORKSURFACE

TST_251

4 of 4

May 2018

FLUSH END AND FLUSH END BRACKET

WORKSURFACES & COUNTERTOPS

transit

Installation Guides

Содержание transit

Страница 1: ...her E01 0098 x4 B2 10 x 0 875 LG Screw Quad Pan Washer E01 0077 x4 D Worksurface TWRR x1 A2 1 4 20 x 5 8 Mach Scr Black Quad Truss E01 0113 x6 E1 FS Main Modesy Panel Sub Assembly N30 0011 X x1 E2 FS...

Страница 2: ...ce onto a clean surface Flip the Flush End Support upside down and align the holes on the support with the holes on the Worksurface Secure the support with Screws provide in the kit Section Descriptio...

Страница 3: ...3 Remove Screws located at the back on the Flush End Support as shown above Section Description Page No Date PREPARATION FOR FLUSH END BRACKET INSTALL FLUSH END BRACKET TST_251 4 of 4 May 2018 FLUSH...

Страница 4: ...ovided NOTE FS Wire Tray Modesty Panel is adjusted to position the vinyl trim flush to the underside of the Worksurface STEP 7 Using a leveler adjust the Gable Leveler to level the assembled Worksurfa...