Section:
Description:
Page No:
Date:
RAIL ASSEMBLY
SLIDING NUTS INTO POSITION
INT_009
6 of 12
Aug 2017
COMPLETE FRAME AND WIRE GAP WORKSURFACE - SINGLE SIDED
FRAMES, SUPPORTS AND WORKSURFACES
interpret
Installation Guides
STEP 8: Slide Nuts inside the channel to line them up with holes in both Gable Corner
Brackets. Place remaining Nuts in approximate position for future installation.
STEP 7: Insert Hex Nuts into Rail underside channel. There should be one Nut for each Gable
Corner Bracket and two for each Worksurface Support Bracket.. Install Rail Cap both sides of
the Rail. Rotate set screws to secure Caps in place.
G
F
Q
O
Q
