STEP 8: Place Gables in their Approximate location. Bring over Cable Tray and align round
hole with correspondent Gable Top Plate hole to determine Gable proper location. Fasten
screws into round holes first. Use one of the slot holes on each side of the Cable Tray, after.
STEP 9: Place Worksurface Channels on top of Legs. Make sure the holes align and fasten as
shown, using four screws per leg.
STEP 10: Attach Worksurface Angles to Legs with screws provided, as shown. Make sure the
shorter side of the angle faces the user.
Section:
Description:
Page No:
Date:
DETERMINE GABLES PROPER LOCATION
INSTALL WORKSURFACE CHANNELS
INSTALL WORKSURFACE ANGLES TO LEGS
HAB_111
6 of 10
July 2017
FRAME ASSEMBLY
FRAMES & WORKSURFACES
D1
D7
IMPORTANT: Please refer to HAB_311 for installation
of Electric Components into Cable Tray & Mid Gable.
Use Cable Tray
round hole, as guide
to properly locate
Gables.
B
C
D1
B
D3
NOTE:
End Gable
shown for demostration
D8
D3
D2
D11
D2
D4