Teknim VAP Series, Руководство пользователя

Страница: 5 / 36

BD-1/07-002 4
SPARE PART
If parts of device are changed to repair, ensure that technician uses original parts
against electrical shock, fire, etc.
SECURITY CONTROL
To control if your device operates in healthy and convenient conditions, demand
service from your vendor.
2. INTRODUCTION
Thank you for selecting VAP Series Security Systems from Teknim Security
Systems. VAP Series Security Systems have been designed for you to provide
reliable security protection and your home’s automation. Read this manual carefully
and have your installer’s instruction about basic system operation and your system’s
features which have been implemented in. Keep this manual in a safe place for later
reference.
Your system consists of one of Teknim VAP Series Alarm Panels (VAP204, VAP304,
VAP308 VAP404, VAP408 or VAP416), one or more Teknim Keypad (VPC016,
VPC104, VPC108, VPC116, VPC132 or VPC301) and various devices such as
detectors, sensors, sirens… etc.
The metal cabinet contains the system electronics, transformer, fuses and battery.
There is no reason for anyone except your installer to have access to the control
panel. All the keypads allow you to easily access your security system’s functions, to
send commands to the system and to display the current system status.
2.1 User types and authorizations
There are three user groups in VAP series security systems;
1. Master user ; can make some settings (clock and date setting, user phones setting,
user codes setting, arming/disarming setting, user authorization setting) in master
program and can arm/disarm the system.
2. Normal user ; can arm/disarm the system.
3. Guest user ; can arm/disarm the system one time or within limited time period.
If any user enters invalid codes three times, siren alarms for a while. If the user
continues to enter invalid codes, the alarm period of the siren will increase and the
keypad will be locked temporary
In addition to them, there are also installer code, PC remote control code and duress
code.
Installer code is used by your installer to make system settings. Installer can not
arm/disarm the system and can not access user codes.
PC remote control code is allowing you to control your system via VAPMan software.
Duress code can be used by the person who is under duress. This code can disarm
the system but system calls the CMS. (There is no duress code in VAP204 alarm
panel)
After your system is installed by authorized installer, a master user code will be given
to you to enter master menu. Please change this master code for your security.
2.2 What can I do with my system
Your system is not only an alarm system but also a home automation system. You
can also use your system as an access control system by assigning authorizations to
the users and keypads. In addition to them, there are programmable outputs (PGM