Teknim VAP Series Скачать руководство пользователя страница 12

Страница: 12 / 36

BD-1/07-002

6.1.1. For Setting Partitions

For VPC016, VPC104, VPC108, VPC116 and VPC132 keypads;

For VAP2xx and VAP3xx alarm panel, enter “1” to enable this feature. (There is one partition in

VAP2xx and VAP3xx, if you enter “1”, all system will be set as automatically armed/disarmed.)

For VPC301 keypad;

6.1.2. For Setting Days

For VPC016, VPC104, VPC108, VPC116 and VPC132 keypads;

For VPC301 keypad;

6.1.3. For Setting Time

For VPC016, VPC104, VPC108, VPC116 and VPC132 keypads;

For VPC301 keypad;



[Enter] address 12 01 to program partitions which will be automatically armed

12 04 to program partitions which will be automatically disarmed.

When you enter to the related address, you will see the current status. (No partition is
selected as factory default)



[Enter] the partitions you want to arm/disarm automatically.



[Enter] for A, for B, for C, and for D partition).*



[Enter] (Ok) key.



[Enter] Panel Settings/Auto Arm/Disarm/Auto Arm/Disarm Partitions by using arrow keys.



[Enter] the partitions you want to arm/disarm automatically.



[Enter] (Ok) key.



[Enter] address 12 02 to program days of arming automatically

12 05 to program days of disarming automatically.

When you enter the related address, you will see the current status. (All days are selected as

factory default)



[Enter] the days of arming/disarming automatically. (The days are from 1 to 7 in the order of
Monday to Sunday)



[Enter] (Ok) key.



[Enter] Panel Settings/Auto Arm/Disarm/Auto Arm/Disarm Days by using arrow keys
When you enter the related address, you will see the current status. (All days are selected as
default)



[Enter] The partitions you want to arm/disarm automatically



[Enter] (Ok) key.



[Enter] address 12 03 to program time of arming automatically

12 06 to program time of disarming automatically.

When you enter the related address, you will see the current status.



[Enter] The time of arming/disarming automatically



[Enter] (Ok) key.



[Enter] Panel Settings/Auto Arm/Disarm/Auto Arm/Disarm Time by using arrow keys.



[Enter] the partitions you want to arm/disarm automatically.



[Enter] (Ok) key

Содержание VAP Series





































Результаты поиска

Содержание VAP Series

Отзывы:

Похожие инструкции для VAP Series

Бренды по названию

Популярные бренды

Teknim VAP Series, Руководство пользователя

Результаты поиска

Содержание VAP Series

Отзывы:

Похожие инструкции для VAP Series

Бренды по названию

Популярные бренды