Teknika MUL-16 Скачать руководство пользователя страница 5

Страница: 5 / 6

2. Apply tension by ratcheting

Tension Handle 01

as shown on Fig. 3.

Fig. 3

3. Once satisfactory tension is achieved return

Tension Handle 01

back and push

Sealing Handle 02

forward to seal the joint and cut the excess strap as shown on Fig.4

Fig. 4

4. Return

Sealing Handle 02

back and pull up

Feed Wheel Support Handle 06

to release the strap and to

remove the tensioner by sliding the backfoot out to the side folowed by the front as shown on Fig. 5.
The operation cycle is now complete.

For Parts & Service 1-877-862-6699

WWW.TRADITIONALTOOL.COM

Содержание MUL-16

Страница 1: ... 47 15 50 22 11 23 55 41 43 36 80 26 05 30 01 64 54 32 38 45 41 06 08 53 31 28 29 34 21 35 36 85 59 62 09 57 33 Sealless Combination Tool for Steel Strapping MUL 16 50 53 54 5 8 3 4 16 19 mm 44 47 48 1 2 5 8 13 16 mm For Parts Service 1 877 862 6699 W W W T R A D I T I O N A L T O O L C O M ...

Страница 3: ...nual Strap Type Regular Duty Steel Strap Width Adjustable 1 2 5 8 3 4 13 16 19 mm Strap Thickness Up to 0 025 0 64 mm Joint Type Sealless Weight 8 5 lbs 3 8 kg Footprint L 4 5 W 2 2 For Parts Service 1 877 862 6699 W W W T R A D I T I O N A L T O O L C O M ...

Страница 4: ...le 06 to raise Feed Wheel 26 Load both straps 100 and 101 under Dies 21 under Cutter Blade 22 and under Feed Wheel 26 and release the Feed Wheel Support Handle 06 as shown on Fig 2 Fig 2 For Parts Service 1 877 862 6699 W W W T R A D I T I O N A L T O O L C O M ...