Step
Page 19
Step 16
Pro Tip: Lift with your
legs. And, you know,
your arms.
å
Carefully stand your unit upright.
å
Position your unit in its fi nal location. Turn the ADJUSTABLE FOOT (25E)
downward until it touches the fl oor.
å
IMPORTANT: The ADJUSTABLE FOOT should not extend beyond the
bottom edges of the LEGS (K and L).
å
Before fastening the DOOR to your unit, be sure the mounting screw is against
the stops as shown in the right diagram. If it isn't, loosen the mounting screw
to slide it against the stops. Then tighten the mounting screw.
å
Fasten the DOOR (H) to the RIGHT END (A) as shown in the lower diagram.
Use the screws in the HINGES. You should start each SCREW a few turns
before completely tightening any of them.
å
Fasten a KNOB (69K) to the DOOR (H). Use a GOLD 1" MACHINE SCREW (50S).
å
Peel two BUMPERS from the BUMPER CARD (29M) and stick them on the
DOOR (H) where they will come into contact with the RIGHT UPRIGHT (C).
å
Repeat this step for the other DOOR (H).
å
See the next step for DOOR adjustments.
H
A
C
69K
29M
29M
GOLD 1" MACHINE SCREW
(2 used for the KNOBS)
50S
Turn the ADJUSTABLE FOOT
downward until it touches the fl oor.
25E
Floor
K
L
Mounting
screw
Stop
Hinge
