å
Fasten an END MOLDING (T) to the RIGHT END (A).
Tighten two HIDDEN CAMS.
å
Fasten the other END MOLDING (T) to the LEFT END (B).
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Fasten two CORNER BRACKETS (31G) to the BASES (P
and Q) and BOTTOM (F). Use eight BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
Fasten two METAL BRACKETS (4G) to the BOTTOM (F).
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the BRACKETS are even with the edges of
the BOTTOM.
å
Fasten the BASE (O) to the CORNER BRACKETS (31G)
and METAL BRACKETS (4G). Use six BLACK 9/16"
LARGE HEAD SCREWS (1S).
Step 13
Page 17
31G
31G
O
F
P
Q
4G
A
T
T
B
Use the small holes
in this MOLDING (T).
These edges
should be even.
These edges
should be even.
Arrow
Minimum
190 degrees
Maximum
210 degrees
BLACK 9/16" LARGE HEAD SCREW
(18 used in this step)
1S
