Step 1
å
Assemble your unit on a carpeted fl oor or on the empty carton to
avoid scratching your unit or the fl oor.
å
Fasten two UPPER BRACES (B) to the one of the ENDS (A). Tighten
two BLACK 3/8" HEX HEAD SCREWS (2) using the L-WRENCH (3).
å
Fasten two LOWER BRACES (C) to the END (A). Tighten four
BLACK 3/8" HEX HEAD SCREWS (2) using the L-WRENCH (3).
å
Repeat this step for the other stool.
Page 4
3
B
C
A
B
C
BLACK 3/8" HEX HEAD SCREW
(12 used in this step)
2
Surface without holes
Surface with four holes
Surface with two holes
Do not use this hole.