background image

2

TABLE OF CONTENTS

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Batteries  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Quick-Start Demo  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Headphones  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Basics Of Metal Detecting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

Ground Minerals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Trash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Identifying Buried Objects  . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Size and Depth of Buried Objects  . . . . . . . . . . . . . . . . . . . . .11
EMI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Operation and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Control Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Control Knobs
Off / On / Gain  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Disc / All-Metal / Threshold  . . . . . . . . . . . . . . . . . . . . . . . . . .14
Touchpad Controls
GG / Pinpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

+

and 

-

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Operating in All-Metal mode

Ground Grab (GG)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Setting the Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Unwanted Noise  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Sweeping the Searchcoil . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Reading the Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Target Scale  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Operating in Discrimination mode

Ground Grab (GG)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Setting the Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Gain  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Disc Level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Unwanted Noise  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Sweeping the Searchcoil . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Using Pinpoint  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Reading the Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-20

Ground Balancing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-23
Ground Balancing Technical Info  . . . . . . . . . . . . . . . . . . . . . . . . . .24
Target Display & Audio  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Gold Prospecting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
Hot Rocks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Electrical Interference (EMI)  . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30
Search Techniques  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Target Pinpointing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Optional 5”DD Searchcoil  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Treasure Hunter’s Code of Ethics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Device Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

35

5-YEAR LIMITED WARRANTY

The G2 metal detector is warranted against defects in materials and workmanship
under normal use for 5 years from the date of purchase to the original owner. 

Damage due to neglect, accidental damage, or misuse of this product is not
covered under this Warranty. Decisions regarding abuse or misuse of the
detector are made solely at the discretion of the manufacturer. 

Proof of Purchase is required to make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option,
the metal detector returned. Shipping Cost is the responsibility of the
consumer, must be prepaid to First Texas Products, LLC.

To return your detector for service, please first contact First Texas Products,
LLC for a Return Authorization (RA) Number. Reference the RA number on
your package and return the detector within 15 days of calling to:

First Texas Products L.L.C.

1465-H Henry Brennan Dr.

El Paso, TX 79936

Phone: 915-633-8354

NOTICE TO CUSTOMERS OUTSIDE THE U.S.A.

This Warranty may vary in other countries; check with your distributor for details.

Factory Warranty follows the channel of distribution.

Warranty does not cover shipping costs.

Warranty coverage does not include the cost of transporting the
detector back to an owner who is located outside of the United
States of America.

According to FCC part 15.21 Changes or Modifications made to this device not expressly approved

by the party responsible for compliance could void the users authority to operate this equipment.

Copyright© 2010 by First Texas Products, L.L.C.

All rights reserved, including the right to reproduce this book, or parts thereof, in any form.

Published by First Texas Products, L.L.C.

www.tekneticst2.com

1465-H Henry Brennan Dr., El Paso, TX 79936 • (915) 225-0333

Содержание G2





































Отзывы: