19
Using a 1
½” spanner (like accessory 23014 pictured) undo the insert from the wood lathe. Make
sure that the spindle lock on the lathe is engaged and with the spanner and block of wood or
plastic mallet, exert enough force to move in an anti-clock wise direction
Using 11/2" spanner to remover insert from chuck
With the chuck in your hand and use the 1
½” spanner again apply enough force to the spanner
with a block of wood or plastic mallet to disengage the insert from the chuck
Disassembling the Supernova
2
Chuck
Using Circlip pliers to remove circlip
Using the circlip pliers remove the circlip from the bottom of the chuck holding in the plastic
backing. YOU MUST WEAR SAFTEY GLASSES WHILE PERFORMING THIS OPERATION AS
THE CIRCLIP COULD POSSIBLY FLY IN AN UPWARDS DIRECTION
Remove the M6 grub screw from the side of the chuck.
