19
123-0719-018
Quick Set Depth Function
This function provides a faster method to set the depth stop value however, it may be difficult to set the exact
desired depth value with this function.
Extend the drill press quill down to the point where it
displays the desired depth value.
Press and hold the
<Set Depth>
button for 3
seconds while holding the quill in its position. The
HMI will beep and it will automatically save the value
that is displayed on the HMI screen as the set depth.
Note:
The quick depth stop function will save the exact value that is being shown on the screen. The value will not be
rounded when it is being saved therefore a more precise setting can be achieved quickly with this function.
Using this quick set function whi
le the height is within 5mm (1/5”) from the top position will turn off the set depth
function.
Electronic Depth Stop Function
Once the stop depth value is specified and saved onto the machine, the electronics depth stop function is
activated.
The activation of the electronic depth stop function is indicated by the icon on the HMI screen shown below:
100mm
Extend and hold
the extended
position
Hold for 3
seconds
