Teklynx COMet, Быстрое руководство

Страница: 14 / 18

Page 2 -- 12 Quick Start Guide
1 Click on or press
F8
.
The protocol Selection dialog box appears.
2 Click on New .
3 Click on or press
F9
.
The Source device settings dialog box appears.
4 Using the manufacturer’s information, complete the diffe-
rents boxes as shown below :
Figure 12 Configuring a source device
5 Once the dialog box has been completed, click on Settings...
The Protocol dialog box appears.
6 Check the Proceed with this step box, then complete the
text boxes by referring to the manufacturer’s information.
Here we are looking to obtain the bar code’s check character.
Selecting Set-
tings for the
Bar code Rea-
der