Tekleen LPF series, Руководство пользователя

Страница: 14 / 24

12
5.4 Problem: Screen will not clean properly.
POSSIBLE CAUSE
Restriction in flushing valve dump line due to long “run” distance (e.g., running
uphill, 2” line more than 20’ long, 2” line has more than one elbow).
SOLUTION
Increase pipe size, remove any elbows, avoid elevation gain of pipe after
flush valve.
POSSIBLE CAUSE
Filter was shut down “dirty” with a layer of contaminant dried on the screen.
SOLUTION
Perform Superflush as described on Section 5.2, page 10. If unsuccessful,
remove filter screen (see section 4.1, page 8) and spray the screen with a
high pressure hose to remove the contaminant.
SECTION VI SPARE PARTS
6.1 Recommended Spare Parts
The following are recommended spare parts to keep in stock:
- Fine Screen - Set of O-rings
- Cover Gasket - Dirt Collector
- Upper Bearing - Lower Bearing
- D/P Switch - Controller Board
6.2 Spare Parts List
See filter cutaway on page 17.
Automatic Filters, Inc.
LPF Filters Manual