Watch operating instructions:
1. Split screen function: right stroke screen, left stroke back
2. Dial page: manually rotate the encoder to page up and down, and manually tap the screen
to select the required dial.
Note: the system preset has 10 dial pages, and the last dial is named “custom”, which will
change with the dial market on the app.
3. Menu page: press the side key on the dial page to enter the menú page. After entering the
menú page, double press the side key to switch the menú, and press the side key to return to
the main dial page.
4. Function page: click each application icon on the menu page to enter the corresponding
function, right slide back, and press the side key to return to the main dial page.
Requirement description:
1. Conect the mobile phone with NFC function to the watch and scan the
card bag in the app. No encrypted Mifare card with frequency 13.56 MHz
(default key) And other uid cards, which do not support CPU cards; For
safety reasons, with doorsBank card with key function and door card with
stored value consumption and bus consumption function cannot be
simulated. Even if the simulation is sucesfull, these cards do not have
banBus and other functions.
2. Open NFC card package at APP end; Prompt the user go to the app and
add an NFC card package.
3. Watch end usser can support entry card recording through the
community management office or proper management office.
4.The door lock enters the access control administrator mode, and the
entry administrator, and the watch is directly pasted into the entry.
