background image

 

             

TM-338 Marine Radio  

25/1 Watt VHF/FM Marine Radio

 

 

 

 

TM- 338UD    Date: Jan 7,03

 

 

 

OPERATOR WARNING 
 

TEKCOM requires the radio operator to meet the requirements for Radio 

Frequency Exposure. Unauthorized changes or modifications to this 

equipment may void compliance with ETSI Rules. Any changes or 

modification must be approved in writing by TEKCOM Corp. 

 
This equipment has been tested and licensed to comply with the limits for 

Class D Digital Marine Devices. These limits are designed to provide 

reasonable protection against harmful interference in a residential 

installation. This equipment can generate or radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio  communications and human 

body. Never transmit before you make sure the antenna is properly 
located.  

 

This device is only an aid to navigation. Its performance may be affected 

by many factors: including equipment failure or defects, environmental, 

and improper handling or use. It is the user's responsibility to exercise 

common prudence and navigational judgement, and this device should 

not be relied upon as a substitute for such prudence and judgement. 

Your TEKCOM VHF radio generates and radiates radio frequency (RF) 

electromagnetic energy (EME). This equipment must be installed and 

operated in accordance with the instructions contained in this handbook. 

Failure to do so can result in personal injury and/or product malfunction.

  

 

 

 
 

Tekcom 

Owner’s Manual 

Содержание TM-338


























Отзывы: