Tekcom Industries 21-01904, Руководство пользователя

Страница: 2 / 14

2
To be safe and sure:
!
Never open your radio’s case.
!
Never change or replace anything in your radio except the batteries.
Your radio might cause interference with TV or radio even if it is being operated properly. To
determine whether your radio is causing the interference, you’d better turn it off. If the
interference goes away, your radio is causing it. You can try to eliminate the interference by:
!
moving your radio away from the receiver
!
calling your local RadioShack store for help
If you cannot eliminate the interference, the FCC requires that you stop using the radio.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
SAFETY INFORMATION
Your wireless hand-held portable transceiver contains a low power transmitter. When the
Push-to-Talk button is pushed, it will send out radio frequency (RF) signals. The device is
authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal
Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless devices.
CAUTION:
To maintain compliance with the FCC’s RF exposure guidelines, you should hold the transmitter
and antenna at least 2 inch (5 centimeters) from your face and speak in normal voice, with the
antenna pointed up and away from the face. If you wear the handset on your body while using the
headset accessory, only the supplied belt clip for this product can be used, and when transmitting,
take it out of the belt to ensure that the antenna is at least 1 inch (2.5 centimeters) from you body.
Only the supplied antenna can be used, any unauthorized antennas, modifications, or attachments
could damage the transmitter and may violate FCC regulations.
LCD DISPLAY :
Your radio is designed to have a multifunctional backlight display. By pressing any button except
the CALL and PTT, the backlight will illuminate for 5 seconds.