8
4.
Touch any key to stop the alarm. The
symbol will then disappear.
If you wish to modify the time on the buzzer,
repeat the steps shown. Upon entering the
timer control, the time currently remaining
will appear which you will be able to adjust.
Programing Cooking Time
1.
Select a function and a cooking
temperature using the oven commands.
2.
Press
or
until the
symbol on
the display starts flashing, then press
0_00
display.
3.
Select the time after which you want the
alarm to sound by pressing
or
.
You will hear 2 beeps to confirm that the
time has been set and the clock will start
counting down from the selected time.
The
symbol will flash slowly.
4.
Once the cooking time is up, the oven
will turn off, an alarm will sound and the
symbol will flash.
5.
Press
to stop the alarm and turn off
the
symbol. The oven will switch on
again.
6.
Set the controls to
position to turn off
the oven.
You can change the remaining cooking time
at any time by touching
or
until the
symbol starts to flash quickly. Press
to change the time.
Programing the Cooking Stop Time
1.
Select a cooking function and a
temperature.
2.
Press
or
until the
symbol on
the display starts flashing, then press
0_00
the display.
3.
Select the time after which you want the
alarm to sound by pressing
or
.
You will hear 2 beeps to confirm that the
time has been set and the clock will start
counting down from the selected time.
The
symbol will flash slowly.
4.
When the cycle is finished, the oven will
turn itself off, an alarm will sound and the
symbol will flash quickly.
5.
Press
to stop the alarm and turn off
the
symbol. The oven will switch on
again.
6.
Set the controls to
position to turn off
the oven.
You can change the remaining cooking time
at any time by touching
or
until the
symbol starts to flash quickly. Press
to change the time.
Programing the Cooking Time and
Cooking Stop Time
1.
Select a cooking function and a
temperature.
2.
Press
or
until the
symbol on
the display starts flashing, then press
With the Buzzer function, the oven will
not turn off when the time expires.
With the Buzzer function, the remaining
time will show permanently on the
display. With this programed function, it
is not possible to view the time or the
total programed cooking time.
