Teka LSI6 1480, Руководство пользователя

Страница: 5 / 101

SAFETY INSTRUCTIONS
•
Do not operate the machine in rooms with a temperature of below
5°C. This can cause damages to parts of it. If it is unavoidable, make
sure to drain the water completely from the appliance after every
use (see „Maintenance - Cleaning of drain pump filter“) to avoid
damages caused by frost.
•
Never use flammable sprays or substances in the immediate
proximity of the appliance.
INSTALLATION
•
Remove all packaging material and transport bolts before using the
appliance. Otherwise, serious damage may result.
•
This appliance is equipped with a single inlet valve and can be
connected to the cold water supply only.
•
Mains plug must be accessible after installation.
•
Before washing clothes for the first time, the product shall be
operated once throughout all the procedures without any clothes
inside.
•
Before using the washer dryer, the product shall be calibrated.
•
Do not put any excessively heavy objects on the appliance, like
water containers or heating devices.
•
The new hose-sets supplied with the appliance are to be used and
that old hose-sets should not be reused.
•
Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05
MPa.
ELECTRICAL CONNECTION
•
Make sure the supply cable is not trapped by the machine, it can get
damaged.
•
Connect the product to a grounded outlet protected by a fuse
complying with the values in the “ Technical specifications“ table.
The grounding installation has to be made by a qualified electrician.
Ensure that the machine is installed in accordance with the local
regulations.
4