Teka LP8835W, Инструкция по эксплуатации

Страница: 16 / 20

16
LP8835
9. Troubleshooting
Warning! Only authorised technicians can carry out repairs.
Before contacting our customer service team, please refer to the table below to see if your
fault can be fixed by yourself. Should a service technician visit be arranged and its found
there are no faults with the appliance, a call out charge will apply.
Problem Solutions
The dishwasher won’t start or
turn on — Check that the mains plug is inserted and switched on
at the power point.
— Check that the relevant fuse hasn’t blown.
— Ensure that the dishwasher isn’t over-loaded and the
door is closed completely.
— Error code E1 indicates that the water pressure is low.
Ensure that the water supply is on and fully open.
Water isn’t being drained
from the dishwasher — Check that the drain hose isn’t kinked .
— Check that the filter isn’t clogged. Follow the filter
cleaning process within this user manual.
— Check that your waste outlet isn’t clogged.
Residual soap suds in the
dishwasher after a wash cycle — Ensure that you are only using dishwasher detergents
and the correct dosage.
— Open the dishwasher and allow suds to evapourate.
Then add 1 litre of cold water into the base of the dish-
washer, close the door, select any wash cycle and allow
the dishwasher to drain the water. Repeat if necessary.
Stained interior — Avoid using detergents with colourants, as they can
lead to staining.
White film on internal
dishwasher surface — This can be caused where the water quality is poor
and contains hard water minerals. To clean the interi-
or, simply use a damp sponge with some dishwasher
detergent. Never use harsh abrasives.
There are rust stains on
cutlery — The cutlery may not be corrosion resistant and
shouldn’t be used within the dishwasher.
Banging or knocking noise
within the dishwasher cabinet
during cycle — A spray arm is knocking against an item within a
basket. Pause the dishwasher and re-arrange the items
to ensure the spray arms are free to rotate.
The dishes are not clean after
a wash cycle has completed
or residual detergent left on
dishes — Ensure that you are loading the baskets and racks cor-
rectly, as per the recommendations.
— Try using a different wash program (i.e. a more
intensive option).
— Try using a different detergent or different dosage.
The dishess are not drying — Ensure that the diswasher is loaded correctly.
— Ensure that you have Rinse Aid loaded in the Rinse Aid
dispenser and try adjusting the Rinse Aid Dispenser to
a higher level.
— Remember to slightly open the dishwasher door at the
completion of its cycle.
Knocking noise within the
water pipes — This has no influence on the dishwasher function and
relates to the household plumbing.
— Speak to a qualified plumber to discuss your options.
Note:
If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
— Press the “On/Off” button,
— Switch off the appliance at the power outlet and remove the plug,
— Call our customer service team.
Troubleshooting