Teka IR-720, Инструкции по установке и рекомендации по использованию и обслуживанию

Страница: 8 / 12

8
SWITCHING ON THE DEVICE
1 Touch the On touch key (1) for at
least one second. The touch control
will become active, a beep will be
heard and the indicators (3) will light
up displaying a
0
. If any cooking
area is hot, the related indicator will
flash an
H
.
If you do not take any action in the next
10 seconds the touch control will
switch off automatically.
When the touch control is activated,
you can disconnect it at any time by
touching the touch button (1), even if
it has been locked (lock function acti-
vated). The touch button (1) always
has priority to disconnect the touch
control.
ACTIVATING HOT PLATES
Once the touch control has been acti-
vated with touch key (1), the desired
hotplates can be switched on.
1 Select the desired power level in
the desired hot plate (from
1
to
9
)
with the touch key or (5/6).
The and touch keys are repetiti-
ve, so if you keep them pressed they
increase or decrease in a continuous
manner.
Quick switch-on at maximum power:
Press touch key (5) once. The hotpla-
te will be activated at its maximum power
(level
9
).
SWITCHING OFF THE HOTPLATE
1 Using the touch key (5), lower
the power to level
0
. The hotplate
will switch off.
Quick switch-off: Whatever the power
level setting is, by simultaneously pres-
sing touch keys and (5/6), the hot-
plate will switch to level
0
.
When a hot plate is switched off an
H
will appear in its power indicator, if the
glass surface of the related cooking
area is hot and there is a risk of burns.
When the temperature drops, the indi-
cator switches off (if the hob is discon-
nected), or otherwise a “-” will light up
if the hob is still connected.
SWITCHING OFF THE DEVICE
The device can be switched off at any
time by pressing the general on/off
touch key (1). In standby mode an
H
will appear in the areas that are hot.
The indicators for the rest of the hot-
plates will not light up.
The switching off of the device or of
each individual hotplate will be accom-
panied by a longer beep than the rest.
After use, disconnect the
device by using its control and do
not rely on the pot/pan detector.
Locking of the touch keys
of the induction hob
By using touch key lock (8) you may
lock all the touch keys of the touch
control panel. This prevents functions
from being activated accidentally and
children from playing with the controls.
Bear in mind that when the touch con-
trol is on, you can still switch it on/off
using touch key (1) even if the lock
function is activated (pilot light 9 is on).
On the other hand, if the touch control
is switched off, the locking function
does not allow the on/off touch key
(1) to be used. You must first deactiva-
te the lock.
To activate or deactivate the function,
keep touch key (8) pressed for
about 1 second. When the function is
activated, the pilot light (9) lights up.
When all the heaters are not powered,
and one heater is temporized at zero
power level, the key-lock function is
activated after 1 minute.
Depending of the lodels, once the hob
has been turned off, and after 1 minu-
te, the key lock function is actived ligh-
ting the corresponding pilot.
Power Function
(Power concentration)
This function allows the induction plate
to be given extra power, in excess of
its nominal power. The said power
depends on the size of the hot plate
and it can reach the maximum value
allowed by the generator.
POWER BOOST FUNCTION
CONNECTION
1 From power level
9
, press touch
key (6), and the
P
symbol will be
displayed in the indicator.
The Power boost function has a maxi-
mum duration of 10 minutes. After this
time has elapsed, the power level will
automatically reset to level
9
.
POWER BOOST FUNCTION DIS-
CONNECTION
The Power boo st function can be dis-
connected by pressing touch key (5)
to return to power level
9
.
The function may also automatically
be disconnected if the temperature of
the cooking area becomes too high.
Heat-up Function
This function allows the ceramic plate
to get a maximum power for a defined
time.
HEAT-UP FUNCTION CONNECTION
1 From power level
9
, press touch
key (6). The decimal point of the
display (4) blinks for 10 seconds.
2 During these 10 seconds the desired
level must be selected (between 1
and 8). After this time a beep
sounds, and the decimal point
remains fixed, indicating the heat-
up function is on.
If the power level is 0 or 9, the heat-up
function is cancelled.
HEAT-UP FUNCTION DISCONNEC-
TION
The heat-up function can be discon-
nected by pressing touch key (5) to
return to power level
9
.
The function may also automatically
be disconnected if the temperature of
the cooking area becomes too high.
The duration of the heat-up function
depends of the power level selected
(see table 1).
1
2
3
4
5
6
7
8
Table 1
Selected
power level
HEAT-UP
DURATION
(in seconds)
72
164
288
328
390
72
164
164