Installation WCK4
For attachment of WCK4 towards drainage: The toilet
will be fitted and adjusted with the cistern and inlet /
outlet valve in the cistern. Drill for fastening of bolts
around drainage measurements according to the
enclosed drawing. Also bear for wall mounting
460mm from the wall centered on the drain. Attach
the joint sleeve to the drain from the toilet and push
the entire toilet into position for attachment. Attach
the toilet to the wall and floor. Connect water inlets to
the inlet valve in the cistern from the bottom with a
3/8 "connection. Attach the inspection hatch.To attach
WCK4 to floor drainage: The toilet should be fixed to
the wall to be stable, so adjust the drain to ensure
that the toilet can be mounted to the wall in addition
to the floor. S-lock is not included, so this must be
adapted to the drain on site.
2
FDV Revision 20201119
www.intra-teka.com
