Maintenance GUB3
SPARE PARTS:
Wall panel: ZVBGUB
Bucket grid: GUBRIST
Valve 1 1/2" (lower part): 79006
Sealing (lower part): 79030
Sealing celleprene: 91099
Support bracket: 91019
Bracket plate: ZGUB3BRPL
Strainer: 79110
Assembly instructions: YMONTGUB3
Maintenance of Intra products in stainless steel
Congratulations on your purchase of an Intra product
that has been produced according to the highest
quality requirements. Several of our products are
supplied with plastic film. This film protects our
products during transportation.
Before you can start using your product the film has
to be removed. We recommend that the product is
cleaned on a regular basis; this is to assure that your
Intra product AISI304 will keep its original quality and
appearance. Use mild liquid soap or a mild detergent
which is intended for use on stainless steel and clean
water. Rinse carefully and wipe the surface with a dry
cloth. Never use a detergent that contains chlorine,
iodine, fluoride or abrasives on stainless steel. Also
avoid contact with acid solutions and other
substances that are not compatible with stainless
steel. Keep in mind that food and skin care products
may contain substances like this. Ketchup, juice, salt
and some cleansing moisturizers and nail polish are
examples of such products. Any spilling of this kind
should be wiped of immediately.
Please have the following in mind
• To avoid stains on the products surface, do not let
water or any other fluid dry on the product.
• Stainless steel can stand hard treatment but sharp
objects may easily scratch the surface of the product.
For products with a normal polish (brushed finish)
this will be quite visible when the product is new.
After a period of use these marks will be smoothed
out, without the product loosing its lustre. The
scratches will always be visible on products in satin
and with a grinded finish.
• Scouring powder and steel wool should never be
used on stainless steel. Apart from the risk of
scratches, there is also a risk that rust stains will
attack the steel.
• Avoid stainless steel in direct contact with, or in
environments with, Chlorine based solutions.
• Silver polish leaves spots that cannot be removed
3
FDV Revision 20200210
www.intra-teka.com
